Location:
ul. Bzow 12, 05-830 Kajetany.

Phone:
+48 696 60 60 90

Opening hours:
9:00am - 5:00pm, Mon - Fri

Varyflex V4 Offset

The innovative and powerful UV Mid-web V4 Offset print unit in widths 670mm (26'') and 850mm (33'') enriches further the Varyflex V4 range. Varyflex V4 Offset, Mid-web printing press summarizes all the advantages of Varyflex presses widening its reach through the addition of powerful Offset technology to combine inking and printing quality standards with low-cost platemaking and precise color control. Varyflex V4 Offset printing press is expected to revolutionize the packaging market thanks to a newly conceived Offset print unit characterized by high flexibility, simplicity in use and wide machine accessibility. The use of lightweight sleeves and the availability of a Revolver Cart for sleeve replacement are part of the so-called 'Easy Sleeve Format Change' patented by OMET and contribute to make this printing press a true variable-size offset machine.

Offset by sleeve unit

Inking train with 20 rollers
Extra unit stiffness for no vibrations
Direct-drive transmission on sleeve shaft and impression cylinder
10 different water-cooled motors on each printing unit
Multivision register control system, both machine and cross side
Automatic washing system
Maximum speed: 400 m/min
Offset plate sleeves with skewing adjustment to correct the small misalignments of the plates directly on the press
Pneumo-locking light sleeves made of fiberglass, aluminum or carbon fiber
Axis of the plate mandrel with fixed center to improve printing precision

Easy sleeve format change

Automatic pressure adjustment: OMET patented pressure adjustment system automatically controls and adjusts the pressure of all the rolls at each repeat changeover.
Offset Revolver cart: The Revolver cart is a smart sleeve-holding device that facilitates sleeves changeover. It can house up to 8 sleeves and serve 3 printing units, with 2 free shaft always available.
Sleeves equipment: Varyflex V4 offset units use pneumo-locking sleeves available with fiberglass, aluminum or carbon fiber external tube.

Printing configurations

Electron Beam WET/WET: Electron Beam is a food compliant curing system generating very little heat for a superior film handling at high-speed production.It provides an instantaneous and complete curing even at maximum line speed, requiring lower energy than UV and thermal drying.
UV WET/WET: Multiple-lamp drying system interposed between 2 or 3 printing units, with UV lamps mounted on a large servo-driven chill drum. It is suitable for both Hg and LED UV lamps.
UV WET/DRY: Interdeck UV curing system with 1 lamp mounted on a servo-driven chill drum placed inside every printing unit. It is suitable for both Hg and LED UV lamps.

Flexo by sleeve

The new flexo unit is specifically designed to integrate the offset printing process with no limitations in performance and quality. The new Flexo by Sleeve concept applied on both anilox and flexo plate, along with the fully Direct-Drive transmission by independent motors, make it the best complementary solution in terms of flexibility and productivity.

Technical Specs
In-Line Technologies
Aplications

	670	850
Max speed	400 m/min	400 m/min
AVAILABLE PRINTING TECHNOLOGIES
Flexo UV	16''-33''	16''-33''
Flexo Water Base	16''-33''	16''-33''
Offset (Sleeve)	16''-32''	16''-32''
Printing plates technology	flexo/offset plates mounted on sleeves	flexo/offset plates mounted on sleeves
Printing axes	direct-drive independent motor	direct-drive independent motor
Cross registration	automatic	automatic
Intelligent automatic pre-register	automatic	automatic

Hot Air drying systems

Electron Beam

Offset by Sleeve

Flexo

Rotogravure

UV & UV LED

Wet-glue labels

In-Mold Lables (IML)

Flexible packaging

Special applications

Shrink sleeves

Download Brochure: Varyflex V4 Offset

+48 696 60 60 90