This site uses cookies, so that our service can work better.
I understand
Location:
PL - ul. Bzow 12, 05-830 Kajetany.
Office, Demonstration Center:
PL - ul. Sloneczna 116 A, 05-500 Stara Iwiczna.
Phone:
+48 696 60 60 90
Opening hours:
9:00am - 5:00pm, Mon - Fri

Electroman 330/410


The rotary foil stamping system ELECTROMAN is a set of electrically heated hot foil stamping mandrel and impression cylinder. Due to its electrical operation the system needs no external heating equipment. The ELECTROMAN concept is designed for basic stamping requirements.
 

ELECTROMAN at a glance
  • Available with 330 and 410 mm stamping width
  • Sophisticated adjustment: setup of the stamping pressure independently from the preload
  • Fast running due to high preload
  • Clean handling: For an extremely fast job change, an externally pre-heated mandrel is exchanged with the last job's mandrel. Changing the tool is very simple. Exact positioning is done tool-free. On top, of course, temperature control is set digitally and current temperature is displayed to the user.



SPECYFICATIONS

ELECTROMAN 330   
  Foil width / stamping width, max. 350 / 330 mm
  Mandrel types (Diameter / format length)

D62 (9" .. 14") | D85 (12" .. 18 1/8") | D135 (18 1/4" .. 24")
  Max. set temperature

220° C
ELECTROMAN 410  
  Foil width / stamping width, max. 430 / 410 mm
  Mandrel types (Diameter / format length) D85 (12" .. 18 1/8") | D135 (18 1/4" .. 24")
  Max. set temperature

220° C
+48 696 60 60 90
MENU

Electroman 330/410


The rotary foil stamping system ELECTROMAN is a set of electrically heated hot foil stamping mandrel and impression cylinder. Due to its electrical operation the system needs no external heating equipment. The ELECTROMAN concept is designed for basic stamping requirements.
 

ELECTROMAN at a glance
  • Available with 330 and 410 mm stamping width
  • Sophisticated adjustment: setup of the stamping pressure independently from the preload
  • Fast running due to high preload
  • Clean handling: For an extremely fast job change, an externally pre-heated mandrel is exchanged with the last job's mandrel. Changing the tool is very simple. Exact positioning is done tool-free. On top, of course, temperature control is set digitally and current temperature is displayed to the user.



SPECYFICATIONS

ELECTROMAN 330   
  Foil width / stamping width, max. 350 / 330 mm
  Mandrel types (Diameter / format length)

D62 (9" .. 14") | D85 (12" .. 18 1/8") | D135 (18 1/4" .. 24")
  Max. set temperature

220° C
ELECTROMAN 410  
  Foil width / stamping width, max. 430 / 410 mm
  Mandrel types (Diameter / format length) D85 (12" .. 18 1/8") | D135 (18 1/4" .. 24")
  Max. set temperature

220° C