This site uses cookies, so that our service can work better.
I understand
Location:
ul. Bzow 12, 05-830 Kajetany.
Phone:
+48 696 60 60 90
Opening hours:
9:00am - 5:00pm, Mon - Fri

Label Unwind and Splicing Systems

Designed for higher speed production environments where optimum production efficiency is assured by utilizing manual splicing techniques for continuous label application. Our Label Unwinds offer ergonomic, trouble-free, reliable equipment which can be adapted to any pressure-sensitive labeling system where the minimum or no downtime is a prime objective.


PRODUCT DETAILS

HARLAND GEMINI
Consisting of two 500mm diameter vertically-mounted reels with variable- speed powered unwind. A label reservoir system and splicing table are incorporated which allow continuity of label-feed whilst the manual splicing operation is carried out. The web is turned to a vertical attitude via a rotating module. The sequencing of the system is controlled by a PLC.

920 DUAL ROLL UNWIND
When a label roll gets low, the system alarm warns the operator that service is required. The operator can then jog the rest of the label roll into a holding bin, providing a buffer to feed the applicator while splicing a new roll. The jog stops when the end of the roll appears on the work table. Using these features, a trained operator can splice-in a new roll in seconds and never stop your production line.


SPECYFICATIONS

HARLAND GEMINI

  • Production Rates:
  • Maximum linear speed 110 metres per minute

Electrical:

  • Requirements
  • DC drive 110 or 240 volt

Product Capacity:

  • Maximum Diameter: 500 mm

Label Capacity:

  • Maximum Web Width: 150 mm

920 DUAL ROLL UNWIND

  • Roll Diameter:
  • 20”

Roll Width:

  • 6” (9.5” optional)

Speed:

  • Variable speed to 3000 inches per minute

Download Brochure: accraply_920_english19 | harland_gemini_english19
+48 696 60 60 90
MENU

Label Unwind and Splicing Systems

Designed for higher speed production environments where optimum production efficiency is assured by utilizing manual splicing techniques for continuous label application. Our Label Unwinds offer ergonomic, trouble-free, reliable equipment which can be adapted to any pressure-sensitive labeling system where the minimum or no downtime is a prime objective.


PRODUCT DETAILS

HARLAND GEMINI
Consisting of two 500mm diameter vertically-mounted reels with variable- speed powered unwind. A label reservoir system and splicing table are incorporated which allow continuity of label-feed whilst the manual splicing operation is carried out. The web is turned to a vertical attitude via a rotating module. The sequencing of the system is controlled by a PLC.

920 DUAL ROLL UNWIND
When a label roll gets low, the system alarm warns the operator that service is required. The operator can then jog the rest of the label roll into a holding bin, providing a buffer to feed the applicator while splicing a new roll. The jog stops when the end of the roll appears on the work table. Using these features, a trained operator can splice-in a new roll in seconds and never stop your production line.


SPECYFICATIONS

HARLAND GEMINI

Electrical:

Product Capacity:

Label Capacity:

920 DUAL ROLL UNWIND

Roll Width:

Speed:


Download Brochure: accraply_920_english19 | harland_gemini_english19