This site uses cookies, so that our service can work better.
I understand
Location:
ul. Bzow 12, 05-830 Kajetany.
Phone:
+48 696 60 60 90
Opening hours:
9:00am - 5:00pm, Mon - Fri

iFlex


The iFlex label press is simple to use and quick at set-up! Several innovations characterize this press, all aiming at simplifying the printer’s work in reaching the highest quality, effortless. They include servo-assisted pre-register and register setting devices that speed up the machine set-up (1 minute to set 8 Flexo units) and rebooting after job change.
iFlex has shortest web path in narrow web printing for incredible savings in the start-up phase (waste measured is below the transition paper between two prints!). iFlex is the only machine to have all the impression rollers Direct Drive with obvious benefits on the print quality and in waste savings.
The machine handles a wide range of sizes, from 5,5" to 18'' for small spending in printing plates production. iFlex is designed to work continuously, without maintenance stops. It is a robust, silent press, meant for intensive work cycles and performance, and consistent result.
iFlex printing press for labels fills a gap in technology supporting medium to large label converters whose need is to produce in one pass large amounts of standard labels with just-in- time deliveries and decrease process wastage. iFlex can also represent for label converters with lower budget capabilities the ideal press to print labels with a high level of efficiency and a high return on investment.
 

Smart print set-up

The easiest way to pre-register every printing cylinder thanks to the first laser application on a flexo press. The laser beam guides the operator to the perfect alignment of all plates with one simple move, without waiting for further set-up time.
 

Ready to print in 1 minute

iVision system consists of a set of Smart Cameras, one on each flexo unit, which allows the operator to check and fine-tune the register of each color one-by-one in real-time, with sharp precision and very little waste involved.
 

Perfect print stability

iFlex is the first and only press with next-generation direct driven printing transmission, which assures no backlash and absolute printing stability during every run and for the entire lifetime of the machine.
 

Effortless die-cut change

ECDC system is a compact and ergonomic die-cutting unit with “Easy-Change” technology allowing for quick and easy handling of cylinders and flexible dies thanks to its sliding system, with no need for any lifting device.
 
  iFlex 370
Max speed 190 m/min (630 fpm)
Web width 370mm (14''1/2)
Print width 365mm (14''3/8)
Print repeat (infinitely variable) from 5,5 to 18''
Pre-register iLight & iVision
Printing plates technology Cylinders
AVAILABLE PRINTING TECHNOLOGIES  
Flexo UV from 5,5 to 18''
Flexo Water Base from 5,5 to 18''
Rotary silk-screen from 12 to 24''
CONVERTING  
ECDC Easy-Change Die Cut from 8 to 24'' (suggested 12'' min.)
Rock’n’Roll "Dual Function" matrix stripping unit 760 mm (30”)

Rotary silkscreen

Cold Foil

Hot Foil

Delam/Relam - Glue-side printing

Peel&Seal

ECDC - Easy-Change Die-Cut

Rock'n'Roll Dual Function

UV&UV LED

Hot Air drying systems

Self-adhesive labels

Booklet and coupon labels

In-Mold Lables (IML)

Wet-glue labels

Wrap Around Labels
Download Brochure: iFlex_LR
+48 696 60 60 90
MENU

iFlex


The iFlex label press is simple to use and quick at set-up! Several innovations characterize this press, all aiming at simplifying the printer’s work in reaching the highest quality, effortless. They include servo-assisted pre-register and register setting devices that speed up the machine set-up (1 minute to set 8 Flexo units) and rebooting after job change.
iFlex has shortest web path in narrow web printing for incredible savings in the start-up phase (waste measured is below the transition paper between two prints!). iFlex is the only machine to have all the impression rollers Direct Drive with obvious benefits on the print quality and in waste savings.
The machine handles a wide range of sizes, from 5,5" to 18'' for small spending in printing plates production. iFlex is designed to work continuously, without maintenance stops. It is a robust, silent press, meant for intensive work cycles and performance, and consistent result.
iFlex printing press for labels fills a gap in technology supporting medium to large label converters whose need is to produce in one pass large amounts of standard labels with just-in- time deliveries and decrease process wastage. iFlex can also represent for label converters with lower budget capabilities the ideal press to print labels with a high level of efficiency and a high return on investment.
 

Smart print set-up

The easiest way to pre-register every printing cylinder thanks to the first laser application on a flexo press. The laser beam guides the operator to the perfect alignment of all plates with one simple move, without waiting for further set-up time.
 

Ready to print in 1 minute

iVision system consists of a set of Smart Cameras, one on each flexo unit, which allows the operator to check and fine-tune the register of each color one-by-one in real-time, with sharp precision and very little waste involved.
 

Perfect print stability

iFlex is the first and only press with next-generation direct driven printing transmission, which assures no backlash and absolute printing stability during every run and for the entire lifetime of the machine.
 

Effortless die-cut change

ECDC system is a compact and ergonomic die-cutting unit with “Easy-Change” technology allowing for quick and easy handling of cylinders and flexible dies thanks to its sliding system, with no need for any lifting device.
 
  iFlex 370
Max speed 190 m/min (630 fpm)
Web width 370mm (14''1/2)
Print width 365mm (14''3/8)
Print repeat (infinitely variable) from 5,5 to 18''
Pre-register iLight & iVision
Printing plates technology Cylinders
AVAILABLE PRINTING TECHNOLOGIES  
Flexo UV from 5,5 to 18''
Flexo Water Base from 5,5 to 18''
Rotary silk-screen from 12 to 24''
CONVERTING  
ECDC Easy-Change Die Cut from 8 to 24'' (suggested 12'' min.)
Rock’n’Roll "Dual Function" matrix stripping unit 760 mm (30”)

Rotary silkscreen

Cold Foil

Hot Foil

Delam/Relam - Glue-side printing

Peel&Seal

ECDC - Easy-Change Die-Cut

Rock'n'Roll Dual Function

UV&UV LED

Hot Air drying systems

Self-adhesive labels

Booklet and coupon labels

In-Mold Lables (IML)

Wet-glue labels

Wrap Around Labels
Download Brochure: iFlex_LR