This site uses cookies, so that our service can work better.
I understand
Location:
ul. Bzow 12, 05-830 Kajetany.
Phone:
+48 696 60 60 90
Opening hours:
9:00am - 5:00pm, Mon - Fri

Flowman 310/410/510


The rotary foil stamping system FLOWMAN™ is a set of oil heated hot foil stamping mandrel and impression cylinder. The system works with an external oil heating unit which achieves a higher mandrel temperature, allowing the stamping of more demanding hot foil designs.
 

FLOWMAN™ at a glance
  • Available with 330, 410 and 510 mm stamping width
  • Sophisticated adjustment: setup of the stamping pressure independently from the preload
  • Fast running due to high preload
  • Clean handling: safe quick release couplings
    For quick change the heating system has a cooling function. For extremely fast job change, an externally pre-heated mandrel is exchanged with the next job’s tooling.
    Exact positioning is done tool-free. On top, of course, temperature control is set digitally and current temperature is displayed to the user.




SPECYFICATIONS

FLOWMAN™ 330   
  Mandrel types (Diameter / format length) D85 (12" .. 18 1/8")
D135 (18 1/4" .. 24")
  Max. set temperature 250° C
  Foil width / stamping width, max. 350 / 330 mm
FLOWMAN™ 410  
  Mandrel types (Diameter / format length) D85 (12" .. 18 1/8")
D135 (18 1/4" .. 24")
  Max. set temperature 250° C
  Foil width / stamping width, max. 430 / 410 mm
FLOWMAN™ 510  
  Mandrel types (Diameter / format length) D85 (12" .. 18 1/8")
D135 (18 1/4" .. 24")
  Max. set temperature 250° C
  Foil width / stamping width, max. 530 / 510 mm

 

+48 696 60 60 90
MENU

Flowman 310/410/510


The rotary foil stamping system FLOWMAN™ is a set of oil heated hot foil stamping mandrel and impression cylinder. The system works with an external oil heating unit which achieves a higher mandrel temperature, allowing the stamping of more demanding hot foil designs.
 

FLOWMAN™ at a glance
  • Available with 330, 410 and 510 mm stamping width
  • Sophisticated adjustment: setup of the stamping pressure independently from the preload
  • Fast running due to high preload
  • Clean handling: safe quick release couplings
    For quick change the heating system has a cooling function. For extremely fast job change, an externally pre-heated mandrel is exchanged with the next job’s tooling.
    Exact positioning is done tool-free. On top, of course, temperature control is set digitally and current temperature is displayed to the user.




SPECYFICATIONS

FLOWMAN™ 330   
  Mandrel types (Diameter / format length) D85 (12" .. 18 1/8")
D135 (18 1/4" .. 24")
  Max. set temperature 250° C
  Foil width / stamping width, max. 350 / 330 mm
FLOWMAN™ 410  
  Mandrel types (Diameter / format length) D85 (12" .. 18 1/8")
D135 (18 1/4" .. 24")
  Max. set temperature 250° C
  Foil width / stamping width, max. 430 / 410 mm
FLOWMAN™ 510  
  Mandrel types (Diameter / format length) D85 (12" .. 18 1/8")
D135 (18 1/4" .. 24")
  Max. set temperature 250° C
  Foil width / stamping width, max. 530 / 510 mm